wolfhound 2006-02-21 08:02
I am going crazy trying to set-up three programs so that they will work on my secondary monitor. Even when it is set to be the primary. I understand that some software programs won't work on a secodary however, itsn't that the reason Ultramon allows you to set the primary? I could be misunderstanding this.
My displays are the following. 17" VGA monitor (secondary) & 65" Sony HDTV (primary)
First program is WinDVD. I select in on the secondary and when I try to switch it to the primary it is only 1/4 of the original size. Is this a factor of the display profile for the primary?
Second program is NeverWinterNights. I can't get it to look good on the primary display. The top and bottom are always cut off. No matter what setting I select on the display.
The third program is two EA Sports games. Even with the 65" selected as primary. They are never displayed on the screen.
|
Christian Studer 2006-02-21 10:40
Most fullscreen applications can't be moved to a different monitor successfully with UltraMon.
For WinDVD, try moving it to the primary monitor first, then switch it to fullscreen mode. Most likely it will then run fullscreen on the primary monitor.
Regarding the issue with the games: is the TV monitor #2?
Christian Studer - www.realtimesoft.com
|
wolfhound 2006-02-21 12:12
Okay, I will try the WinDVD on the TV and then go full screen.
The TV is monitor #2 however, I have tried to make it the primary for the games. Is there another step that I am missing?
Thank you.
|
Christian Studer 2006-02-22 00:28
My guess would be that the games have a problem with the primary monitor being #2.
The only workaround for this would be to change the monitor connections, connect the TV to the port where you now have the 17" monitor, and vice versa.
Christian Studer - www.realtimesoft.com
|
