|
Post Reply
Gareth Burrows 2007-09-08 09:07
Hi,
Using the mirroring function on ultramon, for some reason on the second monitor (LCD HDTV) the screen flickers at the top.
When using the HDTV as the primary, picture is fine, crystal clear. Is there a reason why it might been flickering when mirroring?
My primary monitor is plugged into the d-sub port and the HDTV into the dvi port.
Any help will e appreciated,
Regards
Gaz
|
Christian Studer 2007-09-09 11:09
What's the refresh rate used for the second monitor for mirroring? The setting is under mirroring settings.
Usually this shouldn't be an issue with LCDs though.
Christian Studer - www.realtimesoft.com
|
Gareth Burrows 2007-09-10 06:38
Ive tried it on both 60 and 75hz i think thats the rate, but with the same effect
The screen looks slightly interlaced on the lcd as well, but its not on interlaced mode?
Gaz
|
Christian Studer 2007-09-10 08:04
Unfortunately I don't know what might cause this, let me know if you find out anything else.
Christian Studer - www.realtimesoft.com
|
Post Reply
|
