|
Post Reply
Dave Maks 2004-07-15 09:41
Hi
A couple of days ago i played around with mirroring one of my monitors onto the tv output on my primary adapter using Ultramon.
Ever since then all video - from tv card or media player, is very jerky when played anything bigger than a postit note size window.
I have put all the settings in ultramon back to normal - no joy
I have reinstalled ultramon, my video adapters and even all the tv card drivers and software - with no luck
Any ideas?
Thanks
|
Christian Studer 2004-07-15 20:32
Please run dxdiag.exe and check if DirectDraw acceleration is still enabled for all displays. Enable it if it isn't.
UltraMon mirroring will disable DirectDraw acceleration if the 'disable video overlays and 3D acceleration' option under mirroring options is checked. The original setting should get restored when stopping mirroring, maybe this wasn't done for some reason.
Christian Studer - www.realtimesoft.com
|
Dave Maks 2004-07-20 06:31
Thats fixed it thanks!
It was only disabled on the primary monitor, but video was slow on all monitors. But hey, its fixed so its all good
Many Thanks
Dave
|
Post Reply
|
