|
Post Reply
Dave Warburton 2002-03-19 11:11
Hi all,
Surprised to have not seen this mentioned before....
I've recently got a decent motherboard that supports proper standy and hibernation (Abit KR7). There seems to be an issue when resuming from these modes when Ultramon is loaded... I enter standby/hibernation okay, and when resuming I get as far as hearning music play and the screens are redrawn, but after a second or so I get a BSOD.
This all goes away when ultramon is not loaded... I can resume without a problem.
Any ideas about a fix or if I can get around this?
Otherwise killer program! Looking forward to Beta 7!!! :)
Cheers,
Dave.
|
Christian Studer 2002-03-19 11:43
What video cards are you using? Another user had the same problem, he was using XP, Athlon and an Nvidia GeForce2 MX dualhead card.
Please post your system configuration. Also let me know if the module that caused the problem is shown on the bluescreen (usually near the top, for example win32k.sys or similar).
Christian Studer - www.realtimesoft.com
|
Dave Warburton 2002-03-20 20:22
Thanks for getting back to me.
I'm not at home at the mo' but I'll double check as soon as I get back.
I'm pretty sure the error is with win32.sys and/or ntfs.sys
I've actually just recently re-installed XP and seem to get the same issue. As I said I'll double check when I get home. My spec is as follows:
Abit KR7
Athlon 1.4Ghz (Thunderbird)
MSI GeForce 3 Ti200 (64meg)
TNT2 PCI (32meg)
WinXP Pro
SBLive! 1024
784meg PC-2100
Razerboomslang mouse
Logitech keyboard (with iTouch)
Hope this helps,
Dave.
|
Post Reply
|
